LTXG4/1 Automatic Filling and Capping Machine

General Features:

LTXG4/1 Automatic Filling and Capping machine for the application of light liquid filling and capping for plastic or glass bottles. The machine is composed by a conveyor, SS316L volumetric piston pump, top-bottom filling nozzles, liquid buffer tank, bottle index wheel, capping system. The bottle loading/unloading through loading/unloading turntable (alternative Ø620mm or Ø900mm), or directly from an production line.

 Technical Features:

ZH-50D Semi-Automatic Cartoning Machine

General Description

This equipment is used for round bottled medicine, food-stuff, cosmetic, etc. packing into square box. This machine is applicable for cylinder-shaped, tubular and dolifor products. The product will automatically drop into box via star wheel and conveyor.

Automatic Cartoning Machine (box folding→filling→packing) It is specially design to automatic pack small quantities’ multi size box. With low cost and only require small area. It is suitable for various sizes of box. The machine is a vertical type with multiple function and require a short time to change mould.

The machine is made of aluminum alloy with anode treatment. Rust proof long service life and easily clean.

Technical Data

DPT-118 4 Plastic Ampoule Filling and Sealing Machine

Application:

This is the most advanced Suppository Filling and Sealing Machine in China. The machine is suitable for any kinds of material, such as PVC laminated by PE, PVC laminated by LDPE. It can be filled by Liquid, Honey, Semi Liquid, etc.

This machine is PLC Control and adopts easy changeable Button Panel for operating. The machine is stepless running, one minute for 1-50cutting. It is Suitable for Pharmacy Factory, Hospital, Lad, Etc

Features:

1.   Controlled by PLC, the frequency conversion in finitely variable speed.

2.  All the process such as spreading roll, ampoule bottle forming, filling, sealing, printing serial numbers, cutting, etc are controlled by programming.

3.  The filling head doesn’t drop, leak, produce bubbles and spill over

4.  Meet GMP Standard

Main Technical Data:

Working principle

The ZJR-200 Vacuum Emulsifying Mixer is composed of main pot(emulsifying pot),a water phase pot and an oil phase pot, vacuum unit, up-and down system, electrical control system and the motor frame etc.

The main pot is composed of the cut-off mixing pot, cut-off mixer unit, circulating system and the stirring system etc.

The materials are sucked into emulsifying pot by transportation pipe under the vacuum state, or it also can be put from the feed inlet.

The material are stirred by both the center blade and side scraper, which works on the inner surface of pot keeping stirring materials from being stuck onto the wall. In the process of blade-stirring, the materials are continuously crushed, pressed, fold. Then the material is sent to the cut-off mixing unit where they are again cut off, broken and stirring by the strong interaction between running cutting wheel and cutting sheath. The materials are finally crushed into small pellets of 200um~2um. Besides, because of the vacuum in emulsifying pot, the bubbles generated during stirring and mixing process are sucked out from material. The ex-circulating system can make the homogenizing more strong. The material within the pot can be give off only under the state of change direction of the control valves. 

The temp controller on operation panel can adjust the temp of the homogenizer pot; The homogenizer stirring and the blade stirring cab be used simultaneously or dividedly; The homogenizer stirring time can be set by the custom according to the different material. After finished the whole procession please rise the pot cover for the clearing.

Main Technical Data:

ZJR-200 Vacuum emulsifying mixer

PS：

1. Contact products material is SUS316L, surface polish. Others SUS304, surface polish. Sealing material is VITON, scrap material PTFE, pipe line connection use TRI-CLAMP, easy for take out. Motor with SS cover for protection.
2. Welding: all welding parts are full weld.    

LTRG-60P Plastic Tube Filling and Sealing Machine

Suitable for Plastic Tube/Laminated Tube

Product Specify

This machine is a high-tech product which successfully developed and designed by adopting advanced technology from abroad and strictly meet GMP requirement. PLC controller and color touch screen are applied and made it possible for programmable control of the machine. It can perform the filling for ointment, cream jellies or viscosity material, sealing or tail folding, batch number embossing (include manufacture date) automatically. It’s ideal equipment for aluminum tube filling and sealing for cosmetic, pharmacy, foodstuff and bond industries.

Feature

1.      With 12 stations and matching with manipulator, the machine is able to meet different type of tail folding, sealing requirements of Alu tube. It is a multi-purpose machine.

2.      Tube feeding, eye marking, tube interior cleaning (optional), material filling, sealing (tail folding), batch number printing, finished products discharging can be performed automatically (the whole procedure).

3.      Servo control makes it precise and convenient to adjust the filling amount by touch screen.

4.      According to the different length of the tube, height of tube chamber can be adjusted easily by motor. With external reversal feeding system, makes tube charging more convenient and tidy.

5.      The mechanical linkage photo sensor precision tolerance is less than 0.2mm. The chromatic aberration scope between tube and eye mark is reduced.

6.      Photo-electronic, electric, pneumatic integrative control is applied with the machine. No tube, no filling. It gives an alarm when low pressure occurs. The machine stops automatically if tube error or open the safety door.

7.      Three-layer jacket instant heater with inside air heating, it won’t damage the pattern on outer wall of tube and achieves firm and beautiful sealing effect.

Main technical parameters