您的位置:首页企业详情

丽水几物网络科技股份有限公司

创建时间:2016年

产品类别:服装机械及纺织机械

职务:销售

网址:www.realsave.cn

出口国家:美洲、非洲、欧洲、中东及东南亚

展品名称:裁剪机

最小起订量:1台

订货交付时间:根据订单要求确认具体交期

认证:CE、CCC、ISO

买家类型:

与他联系
企业介绍
产品展示

紫色智能剪刀JW-1

紫色智能剪刀JW-1

智能剪刀紫色详情页_01.jpg

Main Features:

  1. Low Noise

  2. High Torque

  3. Sharp Blade

  4. Current Protection

  5. Quick Cutting

  6. Smart Buttons

  7. Tungsten Steel Blade

  8. Safe Cutting

  9. LED Light Projection

  10. Physiotherapy Massage

  11. Large Capacity Battery

Parameters

ItemsParameters

Working Volt.
DC 2.8-4.2V

Working Current
1.6A-7.5A
Input Power5-32W

Speed
19000RPM±5%(4.2V)
Planetary Gear Ratio4:1
Working Noise70dB±5%
Led Light0.5W 45-50LM
6000-7000K
Micro Touchswitch100,000 times

Charger Power Supply
Input: AC 100-240V 50/60Hz
Output:DC5V 2A

Charger Specification
Input:DC5V 2A
Output:DC4.2V 2A
Battery Specification21700 Lithium power cell,φ21*73mm
Battery Capacity5000mAh±5%
Charging CurrentAbout 2.0A
Charging Time<150min(2.5hours)
Working time2-3hours without stop/battery
Standby CurrentStandby power consumption)<1mA
Long time placed power consumption<0.4uA


智能剪刀紫色详情页_04.jpg

详情页1_06.jpg

Established in 2016. Jiwu Technology is a professional manufacturer and exporter that is concerned with the design, development and production of cutting machine and sewing machine motor.We are located in Lishui,Zhejiang with convenient transportation access and nice environment. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our factory havs over 210 employees, and we have a sales team with 10 persons.
90% of our main products are been currently exporting worldwide. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customers' satisfaction.
As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching America,Canada,Austrilia,Japan,Romania,Pakistan,India ,south East Asia and so on. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact with us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

FAQ:
1)Q:Can we use our own logo design?
  A:Yes, OEM and ODM are available in our factory,but MOQ is 500sets.Please send your request to our sales staff and specify the effect you want.

2)Q:How long is the sample lead time and is it free?
  A:For existing samples, it takes 2-3 days. If there are special specifications,the days it will take is based on the different products.

All the samples are chargebale,but it can be reducted from the following bulk orders.

3)Q:When is the delivery time?
  A:The production cycle of the minimum order quantity is 7-30 days. The specific time will be decided according to the quantity and requests.

4)Q:What is your terms of payment ?
  A:Amount≤USD10,000,100% in advance. 

Amount≥USD10,000,we accept 30% deposit, and 70% balance before delivery.

5)Q:Do you have any stock?
  A:Yes, we have a small quantity in stock in off season.Pls try to avoid urgent orders,as the factory is busy nearly all through the year.

6)Q:How many colors are available?
  A:We have the colors as the pictures show,if you want other colors,it is available if the quantity reaches to 500sets.


7)Q:Can we use our own packing design?
  A:Yes, you can. Confirm all with the sales.

8)Q:Will you check the products before delivery?
 A:We manufacture 100% new products. Testing before packing,spot-checking before shipment are normal processes.

9)Q:Your ports of shipment?
  A: Ningbo and Shanghai port.


10)Q:How can I arrive to your factory?
A: Our factory is located in Lishui city, Zhejiang province,China. 
Yiwu airport is the nearest airport,or you can come by train directly. We warmly welcome clients to come for visit and cooperation.



紫色智能剪刀JW-1

智能剪刀JW-1

智能剪刀JW-1

Main Features:

  1. Low Noise

  2. High Torque

  3. Sharp Blade

  4. Current Protection

  5. Quick Cutting

  6. Smart Buttons

  7. Tungsten Steel Blade

  8. Safe Cutting

  9. LED Light Projection

  10. Physiotherapy Massage

  11. Large Capacity Battery

Parameters

ItemsParameters

Working Volt.
DC 2.8-4.2V

Working Current
1.6A-7.5A
Input Power5-32W

Speed
19000RPM±5%(4.2V)
Planetary Gear Ratio4:1
Working Noise70dB±5%
Led Light0.5W 45-50LM
6000-7000K
Micro Touchswitch100,000 times

Charger Power Supply
Input: AC 100-240V 50/60Hz
Output:DC5V 2A

Charger Specification
Input:DC5V 2A
Output:DC4.2V 2A
Battery Specification21700 Lithium power cell,φ21*73mm
Battery Capacity5000mAh±5%
Charging CurrentAbout 2.0A
Charging Time<150min(2.5hours)
Working time2-3hours without stop/battery
Standby CurrentStandby power consumption)<1mA
Long time placed power consumption<0.4uA


详情页1_06.jpg

Established in 2016. Jiwu Technology is a professional manufacturer and exporter that is concerned with the design, development and production of cutting machine and sewing machine motor.We are located in Lishui,Zhejiang with convenient transportation access and nice environment. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our factory havs over 210 employees, and we have a sales team with 10 persons.
90% of our main products are been currently exporting worldwide. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customers' satisfaction.
As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching America,Canada,Austrilia,Japan,Romania,Pakistan,India ,south East Asia and so on. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact with us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

FAQ:
1)Q:Can we use our own logo design?
  A:Yes, OEM and ODM are available in our factory,but MOQ is 500sets.Please send your request to our sales staff and specify the effect you want.

2)Q:How long is the sample lead time and is it free?
  A:For existing samples, it takes 2-3 days. If there are special specifications,the days it will take is based on the different products.

All the samples are chargebale,but it can be reducted from the following bulk orders.

3)Q:When is the delivery time?
  A:The production cycle of the minimum order quantity is 7-30 days. The specific time will be decided according to the quantity and requests.

4)Q:What is your terms of payment ?
  A:Amount≤USD10,000,100% in advance.

Amount≥USD10,000,we accept 30% deposit, and 70% balance before delivery.

5)Q:Do you have any stock?
  A:Yes, we have a small quantity in stock in off season.Pls try to avoid urgent orders,as the factory is busy nearly all through the year.

6)Q:How many colors are available?
  A:We have the colors as the pictures show,if you want other colors,it is available if the quantity reaches to 500sets.


7)Q:Can we use our own packing design?
  A:Yes, you can. Confirm all with the sales.

8)Q:Will you check the products before delivery?
 A:We manufacture 100% new products. Testing before packing,spot-checking before shipment are normal processes.

9)Q:Your ports of shipment?
  A: Ningbo and Shanghai port.


10)Q:How can I arrive to your factory?
A: Our factory is located in Lishui city, Zhejiang province,China.
Yiwu airport is the nearest airport,or you can come by train directly. We warmly welcome clients to come for visit and cooperation.



智能剪刀JW-1

无线款伺服直驱裁剪机DWSL-125

无线款伺服直驱裁剪机DWSL-125







Main Features:
Powerful Servo Motor: High torque, average comprehensive energy saving is over 80%.
Safe CuttingHumanized design, wireless ensure safter cutting.
Low Noise: Below 60dB.
Adjsutable Speed: 4 gears can be adjusted to meet different cutting requests.
LED Light: Keep work in dark environment.
Automatic Grinding: The blade becomes sharp by 3seconds pressing. 
HSS Blade: more durable than ordinary blade by 5 times. 
Light Weight: Only 1.3-1.55Kgs for different models.
Strong Lithium Battery: with 500 times charging and discharging.
Non-stop Working: 3 Hours for one battery.

Parameters:

ModelVoltageInput PowerSpeedBattery CapacityCharging timeCharging CurrentN.W

DWSL-100

16.8v

3.6W-150W

800/1000/1200/1400

2500mAh

120minutes

2A

1.3Kg


DWSL-110

16.8v

3.6W-150W

800/1000/1200/1400

2500mAh

120minutes

2A

1.4Kg


DWSL-125

16.8v

3.6W-150W

800/1000/1200/1400

2500mAh

120minutes

2A

1.55Kg

Inner Box(1pcs):31*21*13.5CM
Master Carton(10pcs):71*32*43CM


详情页2_01.jpg

Established in 2016. Jiwu Technology is a professional manufacturer and exporter that is concerned with the design, development and production of cutting machine and sewing machine motor.We are located in Lishui,Zhejiang with convenient transportation access and nice environment. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our factory havs over 210 employees, and we have a sales team with 10 persons.
90% of our main products are been currently exporting worldwide. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customers' satisfaction.
As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching America,Canada,Austrilia,Japan,Romania,Pakistan,India ,south East Asia and so on. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact with us. We are looking forward to forming successful business relationships with new clients around the world in the near future.


FAQ:
1)Q:Can we use our own logo design?
  A:Yes, OEM and ODM are available in our factory,but MOQ is 500sets.Please send your request to our sales staff and specify the effect you want.

2)Q:How long is the sample lead time and is it free?
  A:For existing samples, it takes 2-3 days. If there are special specifications,the days it will take is based on the different products.

All the samples are chargebale,but it can be reducted from the following bulk orders.

3)Q:When is the delivery time?
  A:The production cycle of the minimum order quantity is 7-30 days. The specific time will be decided according to the quantity and requests.

4)Q:What is your terms of payment ?
  A:Amount≤USD10,000,100% in advance. 

Amount≥USD10,000,we accept 30% deposit, and 70% balance before delivery.

5)Q:Do you have any stock?
  A:Yes, we have a small quantity in stock in off season.Pls try to avoid urgent orders,as the factory is busy nearly all through the year.

6)Q:How many colors are available?
  A:We have the colors as the pictures show,if you want other colors,it is available if the quantity reaches to 500sets.


7)Q:Can we use our own packing design?
  A:Yes, you can. Confirm all with the sales.

8)Q:Will you check the products before delivery?
 A:We manufacture 100% new products. Testing before packing,spot-checking before shipment are normal processes.

9)Q:Your ports of shipment?
  A: Ningbo and Shanghai port.


10)Q:How can I arrive to your factory?
A: Our factory is located in Lishui city, Zhejiang province,China. 
Yiwu airport is the nearest airport,or you can come by train directly. We warmly welcome clients to come for visit and cooperation.



无线款伺服直驱裁剪机DWSL-125

无线款伺服直驱裁剪机DWSL-110

无线款伺服直驱裁剪机DWSL-110







Main Features:
Powerful Servo Motor: High torque, average comprehensive energy saving is over 80%.
Safe CuttingHumanized design, wireless ensure safter cutting.
Low Noise: Below 60dB.
Adjsutable Speed: 4 gears can be adjusted to meet different cutting requests.
LED Light: Keep work in dark environment.
Automatic Grinding: The blade becomes sharp by 3seconds pressing. 
HSS Blade: more durable than ordinary blade by 5 times. 
Light Weight: Only 1.3-1.55Kgs for different models.
Strong Lithium Battery: with 500 times charging and discharging.
Non-stop Working: 3 Hours for one battery.

Parameters:

ModelVoltageInput PowerSpeedBattery CapacityCharging timeCharging CurrentN.W

DWSL-100

16.8v

3.6W-150W

800/1000/1200/1400

2500mAh

120minutes

2A

1.3Kg


DWSL-110

16.8v

3.6W-150W

800/1000/1200/1400

2500mAh

120minutes

2A

1.4Kg


DWSL-125

16.8v

3.6W-150W

800/1000/1200/1400

2500mAh

120minutes

2A

1.55Kg

Inner Box(1pcs):31*21*13.5CM
Master Carton(10pcs):71*32*43CM


详情页2_01.jpg

Established in 2016. Jiwu Technology is a professional manufacturer and exporter that is concerned with the design, development and production of cutting machine and sewing machine motor.We are located in Lishui,Zhejiang with convenient transportation access and nice environment. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our factory havs over 210 employees, and we have a sales team with 10 persons.
90% of our main products are been currently exporting worldwide. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customers' satisfaction.
As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching America,Canada,Austrilia,Japan,Romania,Pakistan,India ,south East Asia and so on. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact with us. We are looking forward to forming successful business relationships with new clients around the world in the near future.


FAQ:
1)Q:Can we use our own logo design?
  A:Yes, OEM and ODM are available in our factory,but MOQ is 500sets.Please send your request to our sales staff and specify the effect you want.

2)Q:How long is the sample lead time and is it free?
  A:For existing samples, it takes 2-3 days. If there are special specifications,the days it will take is based on the different products.

All the samples are chargebale,but it can be reducted from the following bulk orders.

3)Q:When is the delivery time?
  A:The production cycle of the minimum order quantity is 7-30 days. The specific time will be decided according to the quantity and requests.

4)Q:What is your terms of payment ?
  A:Amount≤USD10,000,100% in advance. 

Amount≥USD10,000,we accept 30% deposit, and 70% balance before delivery.

5)Q:Do you have any stock?
  A:Yes, we have a small quantity in stock in off season.Pls try to avoid urgent orders,as the factory is busy nearly all through the year.

6)Q:How many colors are available?
  A:We have the colors as the pictures show,if you want other colors,it is available if the quantity reaches to 500sets.


7)Q:Can we use our own packing design?
  A:Yes, you can. Confirm all with the sales.

8)Q:Will you check the products before delivery?
 A:We manufacture 100% new products. Testing before packing,spot-checking before shipment are normal processes.

9)Q:Your ports of shipment?
  A: Ningbo and Shanghai port.


10)Q:How can I arrive to your factory?
A: Our factory is located in Lishui city, Zhejiang province,China. 
Yiwu airport is the nearest airport,or you can come by train directly. We warmly welcome clients to come for visit and cooperation.



无线款伺服直驱裁剪机DWSL-110

无线款伺服直驱裁剪机DWSL-100

无线款伺服直驱裁剪机DWSL-100







Main Features:
Powerful Servo Motor: High torque, average comprehensive energy saving is over 80%.
Safe Cutting: Humanized design, wireless ensure safter cutting.
Low Noise: Below 60dB.
Adjsutable Speed: 4 gears can be adjusted to meet different cutting requests.
LED Light: Keep work in dark environment.
Automatic Grinding: The blade becomes sharp by 3seconds pressing.
HSS Blade: more durable than ordinary blade by 5 times. 
Light Weight: Only 1.3-1.55Kgs for different models.
Strong Lithium Battery: with 500 times charging and discharging.
Non-stop Working: 3 Hours for one battery.

Parameters:

ModelVoltageInput PowerSpeedBattery CapacityCharging timeCharging CurrentN.W

DWSL-100

16.8v

3.6W-150W

800/1000/1200/1400

2500mAh

120minutes

2A

1.3Kg


DWSL-110

16.8v

3.6W-150W

800/1000/1200/1400

2500mAh

120minutes

2A

1.4Kg


DWSL-125

16.8v

3.6W-150W

800/1000/1200/1400

2500mAh

120minutes

2A

1.55Kg

Inner Box(1pcs):31*21*13.5CM
Master Carton(10pcs):71*32*43CM


详情页2_01.jpg

Established in 2016. Jiwu Technology is a professional manufacturer and exporter that is concerned with the design, development and production of cutting machine and sewing machine motor.We are located in Lishui,Zhejiang with convenient transportation access and nice environment. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our factory havs over 210 employees, and we have a sales team with 10 persons.
90% of our main products are been currently exporting worldwide. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customers' satisfaction.
As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching America,Canada,Austrilia,Japan,Romania,Pakistan,India ,south East Asia and so on. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact with us. We are looking forward to forming successful business relationships with new clients around the world in the near future.


FAQ:
1)Q:Can we use our own logo design?
  A:Yes, OEM and ODM are available in our factory,but MOQ is 500sets.Please send your request to our sales staff and specify the effect you want.

2)Q:How long is the sample lead time and is it free?
  A:For existing samples, it takes 2-3 days. If there are special specifications,the days it will take is based on the different products.

All the samples are chargebale,but it can be reducted from the following bulk orders.

3)Q:When is the delivery time?
  A:The production cycle of the minimum order quantity is 7-30 days. The specific time will be decided according to the quantity and requests.

4)Q:What is your terms of payment ?
  A:Amount≤USD10,000,100% in advance.

Amount≥USD10,000,we accept 30% deposit, and 70% balance before delivery.

5)Q:Do you have any stock?
  A:Yes, we have a small quantity in stock in off season.Pls try to avoid urgent orders,as the factory is busy nearly all through the year.

6)Q:How many colors are available?
  A:We have the colors as the pictures show,if you want other colors,it is available if the quantity reaches to 500sets.


7)Q:Can we use our own packing design?
  A:Yes, you can. Confirm all with the sales.

8)Q:Will you check the products before delivery?
 A:We manufacture 100% new products. Testing before packing,spot-checking before shipment are normal processes.

9)Q:Your ports of shipment?
  A: Ningbo and Shanghai port.


10)Q:How can I arrive to your factory?
A: Our factory is located in Lishui city, Zhejiang province,China.
Yiwu airport is the nearest airport,or you can come by train directly. We warmly welcome clients to come for visit and cooperation.



无线款伺服直驱裁剪机DWSL-100

手提式裁剪机DW-110

手提式裁剪机DW-110


Main Features:
1.Powerful Motor
2.Low Noise
3.High Torque
4.Sharp Blade 
5.Durable Worn and Gear
6.Quick Cutting
7.Automatic Grinding
8.Stable Base 
9.Safe Cutting
10.Long life

 Parameters:

ModelVoltageInput PowerBlade SizeCut Thickness N.W
DW-100110V250W100MM27MM2.9KG
220V
DW-110110V250W110MM32MM3.0KG
220V
Inner Box(1pcs):34.5*25.5*15CM
Master Carton(5pcs):77*35*26.5CM


详情页1_05.jpg

Established in 2016. Jiwu Technology is a professional manufacturer and exporter that is concerned with the design, development and production of cutting machine and sewing machine motor.We are located in Lishui,Zhejiang with convenient transportation access and nice environment. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our factory havs over 210 employees, and we have a sales team with 10 persons.
90% of our main products are been currently exporting worldwide. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customers' satisfaction.
As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching America,Canada,Austrilia,Japan,Romania,Pakistan,India ,south East Asia and so on. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact with us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

FAQ:
1)Q:Can we use our own logo design?
  A:Yes, OEM and ODM are available in our factory,but MOQ is 500sets.Please send your request to our sales staff and specify the effect you want.

2)Q:How long is the sample lead time and is it free?
  A:For existing samples, it takes 2-3 days. If there are special specifications,the days it will take is based on the different products.

All the samples are chargebale,but it can be reducted from the following bulk orders.

3)Q:When is the delivery time?
  A:The production cycle of the minimum order quantity is 7-30 days. The specific time will be decided according to the quantity and requests.

4)Q:What is your terms of payment ?
  A:Amount≤USD10,000,100% in advance. 

Amount≥USD10,000,we accept 30% deposit, and 70% balance before delivery.

5)Q:Do you have any stock?
  A:Yes, we have a small quantity in stock in off season.Pls try to avoid urgent orders,as the factory is busy nearly all through the year.

6)Q:How many colors are available?
  A:We have the colors as the pictures show,if you want other colors,it is available if the quantity reaches to 500sets.


7)Q:Can we use our own packing design?
  A:Yes, you can. Confirm all with the sales.

8)Q:Will you check the products before delivery?
 A:We manufacture 100% new products. Testing before packing,spot-checking before shipment are normal processes.

9)Q:Your ports of shipment?
  A: Ningbo and Shanghai port.


10)Q:How can I arrive to your factory?
A: Our factory is located in Lishui city, Zhejiang province,China. 
Yiwu airport is the nearest airport,or you can come by train directly. We warmly welcome clients to come for visit and cooperation.



手提式裁剪机DW-110

有线款伺服直驱裁剪机DWS-125

有线款伺服直驱裁剪机DWS-125

Main Features:
Powerful Servo Motor: High torque, average comprehensive energy saving is over 80%.
Safe Cutting: Humanized design. 
Low Noise: below 60dB.
Adjsutable Speed: 4 gears can be adjusted to meet different cutting requests.
LED Light: keep work in dark environment.
Automatic Grinding: The blade becomes sharp by 3seconds pressing. 
HSS Blade: more durable than ordinary blade by 5 times. 
Light Weight: OnLy 1.1-1.3Kgs for different models.

Parameters:

ModelVoltageInput PowerBlade SizeCut ThicknessSpeedN.W

DWS-100
AC 220V±20%3.6W-200W100mm27mm800/1000/1200/14001.1Kg

AC 110V±20%3.6W-200W100mm27mm800/1000/1200/14001.1Kg


DWS-110
AC 220V±20%3.6W-250W110mm32mm800/1000/1200/14001.15Kg

AC 110V±20%3.6W-250W110mm32mm800/1000/1200/14001.15Kg


DWS-125
AC 220V±20%3.6W-300W125mm40mm800/1000/1200/14001.3Kg

AC 110V±20%3.6W-300W125mm40mm800/1000/1200/14001.3Kg

Inner Box(1pcs):31.5*21*13CM
Master Carton(10pcs):66*32*42.5CM

详情页1_05.jpg

Established in 2016. Jiwu Technology is a professional manufacturer and exporter that is concerned with the design, development and production of cutting machine and sewing machine motor.We are located in Lishui,Zhejiang with convenient transportation access and nice environment. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our factory havs over 210 employees, and we have a sales team with 10 persons.
90% of our main products are been currently exporting worldwide. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customers' satisfaction.
As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching America,Canada,Austrilia,Japan,Romania,Pakistan,India ,south East Asia and so on. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact with us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

FAQ:
1)Q:Can we use our own logo design?
  A:Yes, OEM and ODM are available in our factory,but MOQ is 500sets.Please send your request to our sales staff and specify the effect you want.

2)Q:How long is the sample lead time and is it free?
  A:For existing samples, it takes 2-3 days. If there are special specifications,the days it will take is based on the different products.

All the samples are chargebale,but it can be reducted from the following bulk orders.

3)Q:When is the delivery time?
  A:The production cycle of the minimum order quantity is 7-30 days. The specific time will be decided according to the quantity and requests.

4)Q:What is your terms of payment ?
  A:Amount≤USD10,000,100% in advance. 

Amount≥USD10,000,we accept 30% deposit, and 70% balance before delivery.

5)Q:Do you have any stock?
  A:Yes, we have a small quantity in stock in off season.Pls try to avoid urgent orders,as the factory is busy nearly all through the year.

6)Q:How many colors are available?
  A:We have the colors as the pictures show,if you want other colors,it is available if the quantity reaches to 500sets.


7)Q:Can we use our own packing design?
  A:Yes, you can. Confirm all with the sales.

8)Q:Will you check the products before delivery?
 A:We manufacture 100% new products. Testing before packing,spot-checking before shipment are normal processes.

9)Q:Your ports of shipment?
  A: Ningbo and Shanghai port.


10)Q:How can I arrive to your factory?
A: Our factory is located in Lishui city, Zhejiang province,China. 
Yiwu airport is the nearest airport,or you can come by train directly. We warmly welcome clients to come for visit and cooperation.




有线款伺服直驱裁剪机DWS-125

有线款伺服直驱裁剪机DWS-110

有线款伺服直驱裁剪机DWS-110

Main Features:
Powerful Servo Motor: High torque, average comprehensive energy saving is over 80%.
Safe Cutting: Humanized design.
Low Noise: below 60dB.
Adjsutable Speed: 4 gears can be adjusted to meet different cutting requests.
LED Light: keep work in dark environment.
Automatic Grinding: The blade becomes sharp by 3seconds pressing.
HSS Blade: more durable than ordinary blade by 5 times. 
Light Weight: OnLy 1.1-1.3Kgs for different models.

Parameters:

ModelVoltageInput PowerBlade SizeCut ThicknessSpeedN.W

DWS-100
AC 220V±20%3.6W-200W100mm27mm800/1000/1200/14001.1Kg

AC 110V±20%3.6W-200W100mm27mm800/1000/1200/14001.1Kg


DWS-110
AC 220V±20%3.6W-250W110mm32mm800/1000/1200/14001.15Kg

AC 110V±20%3.6W-250W110mm32mm800/1000/1200/14001.15Kg


DWS-125
AC 220V±20%3.6W-300W125mm40mm800/1000/1200/14001.3Kg

AC 110V±20%3.6W-300W125mm40mm800/1000/1200/14001.3Kg

Inner Box(1pcs):31.5*21*13CM
Master Carton(10pcs):66*32*42.5CM

详情页1_05.jpg

Established in 2016. Jiwu Technology is a professional manufacturer and exporter that is concerned with the design, development and production of cutting machine and sewing machine motor.We are located in Lishui,Zhejiang with convenient transportation access and nice environment. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our factory havs over 210 employees, and we have a sales team with 10 persons.
90% of our main products are been currently exporting worldwide. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customers' satisfaction.
As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching America,Canada,Austrilia,Japan,Romania,Pakistan,India ,south East Asia and so on. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact with us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

FAQ:
1)Q:Can we use our own logo design?
  A:Yes, OEM and ODM are available in our factory,but MOQ is 500sets.Please send your request to our sales staff and specify the effect you want.

2)Q:How long is the sample lead time and is it free?
  A:For existing samples, it takes 2-3 days. If there are special specifications,the days it will take is based on the different products.

All the samples are chargebale,but it can be reducted from the following bulk orders.

3)Q:When is the delivery time?
  A:The production cycle of the minimum order quantity is 7-30 days. The specific time will be decided according to the quantity and requests.

4)Q:What is your terms of payment ?
  A:Amount≤USD10,000,100% in advance. 

Amount≥USD10,000,we accept 30% deposit, and 70% balance before delivery.

5)Q:Do you have any stock?
  A:Yes, we have a small quantity in stock in off season.Pls try to avoid urgent orders,as the factory is busy nearly all through the year.

6)Q:How many colors are available?
  A:We have the colors as the pictures show,if you want other colors,it is available if the quantity reaches to 500sets.


7)Q:Can we use our own packing design?
  A:Yes, you can. Confirm all with the sales.

8)Q:Will you check the products before delivery?
 A:We manufacture 100% new products. Testing before packing,spot-checking before shipment are normal processes.

9)Q:Your ports of shipment?
  A: Ningbo and Shanghai port.


10)Q:How can I arrive to your factory?
A: Our factory is located in Lishui city, Zhejiang province,China. 
Yiwu airport is the nearest airport,or you can come by train directly. We warmly welcome clients to come for visit and cooperation.



有线款伺服直驱裁剪机DWS-110

有线款伺服直驱裁剪机DWS-100

有线款伺服直驱裁剪机DWS-100

有线款伺服直驱裁剪机DWS-100

手提式裁剪机DW-100/110

手提式裁剪机DW-100/110


Main Features:
1.Powerful Motor
2.Low Noise
3.High Torque
4.Sharp Blade
5.Durable Worn and Gear
6.Quick Cutting
7.Automatic Grinding
8.Stable Base
9.Safe Cutting
10.Long life

 Parameters:

ModelVoltageInput PowerBlade Size Cut Thickness N.W
DW-100110V250W100MM27MM2.9KG
220V
DW-110110V250W110MM32MM3.0KG
220V
Inner Box(1pcs):34.5*25.5*15CM
Master Carton(5pcs):77*35*26.5CM


详情页1_05.jpg

Established in 2016. Jiwu Technology is a professional manufacturer and exporter that is concerned with the design, development and production of cutting machine and sewing machine motor.We are located in Lishui,Zhejiang with convenient transportation access and nice environment. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.
Our factory havs over 210 employees, and we have a sales team with 10 persons.
90% of our main products are been currently exporting worldwide. Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customers' satisfaction.
As a result of our high quality products and outstanding customer service, we have gained a global sales network reaching America,Canada,Austrilia,Japan,Romania,Pakistan,India ,south East Asia and so on. If you are interested in any of our products or would like to discuss a custom order, please feel free to contact with us. We are looking forward to forming successful business relationships with new clients around the world in the near future.

FAQ:
1)Q:Can we use our own logo design?
  A:Yes, OEM and ODM are available in our factory,but MOQ is 500sets.Please send your request to our sales staff and specify the effect you want.

2)Q:How long is the sample lead time and is it free?
  A:For existing samples, it takes 2-3 days. If there are special specifications,the days it will take is based on the different products.

All the samples are chargebale,but it can be reducted from the following bulk orders.

3)Q:When is the delivery time?
  A:The production cycle of the minimum order quantity is 7-30 days. The specific time will be decided according to the quantity and requests.

4)Q:What is your terms of payment ?
  A:Amount≤USD10,000,100% in advance.

Amount≥USD10,000,we accept 30% deposit, and 70% balance before delivery.

5)Q:Do you have any stock?
  A:Yes, we have a small quantity in stock in off season.Pls try to avoid urgent orders,as the factory is busy nearly all through the year.

6)Q:How many colors are available?
  A:We have the colors as the pictures show,if you want other colors,it is available if the quantity reaches to 500sets.


7)Q:Can we use our own packing design?
  A:Yes, you can. Confirm all with the sales.

8)Q:Will you check the products before delivery?
 A:We manufacture 100% new products. Testing before packing,spot-checking before shipment are normal processes.

9)Q:Your ports of shipment?
  A: Ningbo and Shanghai port.


10)Q:How can I arrive to your factory?
A: Our factory is located in Lishui city, Zhejiang province,China.
Yiwu airport is the nearest airport,or you can come by train directly. We warmly welcome clients to come for visit and cooperation.


手提式裁剪机DW-100/110

浙江省国际贸易展览有限公司 版权所有 开创网络 技术支持
地址:浙江省杭州市凤起路361号国都商务大厦西18楼 电话:0086-0571-87702814 87702801 85155855 87797446 邮件:admin@expozj.cn
Copyright © 2019. www.expozj.cn All rights reserved 浙ICP备16047758号-1

浙江国展官方微信